CROSSRC EMO X5 Brushless Simulation Rescue Car Parts Leopard 3S Short 6000mah Battery

Core parameters of CROSSRC EMO X5 Leopard 3S short 6000mAh battery:

• Type: Lithium polymer (Li-Po)
• Nominal voltage: 3S (11.1V, full charge about 12.6V)
• Capacity: 6000mAh (top capacity in the same category, about 9% higher than 5500mAh)
• Discharge rate: 50C (instantaneous maximum discharge current: 6000mAh × 50 = 300A)
• Dimensions: about 138mm × 47mm × 20mm (short design, height only increased by 4mm)
• Plug: T-Plug (need to confirm that it matches the original car interface)
• Weight: about 380g (about 50g heavier than 5500mAh, but still lightweight)

CROSSRC EMO X5 Leopard 3S short 6000mAh battery Performance:

1.Power output: Compared with 6S battery, the power is reduced by about 40%-50%, the climbing angle and acceleration performance are limited, but the torque output is more stable.

2.Temperature control performance: High capacity + high discharge rate may heat up faster, it is recommended to check the temperature after continuous use (recommended threshold ≤ 60℃).

3.Balance charging: A Li-Po balance charger that supports 3S is required, the recommended charging rate is 2C (about 12A), and the full voltage is recommended to be 11.4V (single cell 3.8V).

Leopard 3S short 6000mAh battery compared with similar batteries: